Saluran Silikon Pipa HDPE Tahan Korosi
Video produk
Katrangan
HDPE Silicon Duct minangka jinis komunikasi kabel optik (listrik) sing nglindhungi tubing, sing diprodhuksi lan dibentuk liwat extruding synchronistically bahan silikon-inti karo koefisien gesekan kurang nang pipa HDPE.Mangkono pipe HDPE silikon-inti menehi penak kanggo kabel lying amarga lubricating trowongan ngalangi karo kekiatan lan koefisien frication ngisor.Iku dadi pangayoman kabel optik paling majeng ing donya saiki.Kemajuan kasebut ditampilake ing panggantos kabel tarik pribadi.
Mesin ndamu kabel bakal jotosan kabel menyang pipa HDPE gesekan ngisor lan kabel dadi maju ing kacepetan dhuwur ing negara penundaan.Cara laying kabel iki ngindhari karusakan kabel disebabake narik.Kanggo iku, mundhut sinyal ora sengaja disebabake mesin narik wis suda banget lan akeh banget knots asil saka watesan dawa narik wis melorot nemen.Ing wektu sing padha, jumlah penggalian sumur wis diminimalisir lan biaya proyek wis disimpen.
HDPE Silicon Duct nduweni intensitas dhuwur, sifat sing apik banget, tahan suhu dhuwur utawa kurang, adaptasi kanggo owah-owahan steepness lan mlengkung.
Kaluwihan:
- Ora ana alangan ing jarak efektif kabel ndamu maneh lan nyimpen daya saka kabel ndamu;ing situs construction ora perlu ndamu mesin, kompresor lan kabel laying tim, etc liyane.
- Nemen shorten wektu construction, pembuangan trench luwih prasaja lan masalah ing wates terrain bakal ditanggulangi, IE, panggonan seko saluran lan kabel laying bisa rampung ing wektu sing padha anggere kanggo sijine PCD menyang trench excavated lan backfill.
- Ngurangi biaya proyek, kalebu ngirit transportasi segara saka saluran lan kabel, lan konstruksi.
| Item No. | KONSTRUKSI | Bahan Baku | ukuran | Sifat Fisik lan Kimia | |||||||||||||||||
| Bahan | Dhiameter (D/d) | Pilihan Warna | Lumahing batin | Indeks Leleh Fow | Kapadhetan | Kekuwatan Tensile Ing Ngasilake | Elongation Ing Break | Retak Stress Lingkungan Tahan (F50) | Dianggo njaba. (mm) | Kekandelan tembok (mm) | Ovality (%, sadurunge digulung) | Kekerasan Tembok Luar (Sore-D) | Koefisien Gesekan Internal | Kekuwatan Tensile ing Ngasilake | Elongation ing Break | Max Narik Beban | Radius Mlengkung Sawise Cooling | Ring Kaku | Reversi Longitudinal | Tekanan Udara | |
| DW-SD2720 | HDPE (High Density Polyethylene) | 27.0mm / 20.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 27.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥500% | ≥4500N | 560 mm | ≥30kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD2824 | HDPE (High Density Polyethylene) | 28.0mm / 24.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 28.0 (-0.0, +0.3) | 2.00 (-0.2, +0.20) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥500% | ≥2800N | 560 mm | ≥30kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD3225 | HDPE (High Density Polyethylene) | 32.0mm / 25.0mm | Ireng utawa kanthi warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 32.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥5000N | 300 mm | ≥40kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD3226 | HDPE (High Density Polyethylene) | 32.0mm / 26.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 32.0 (-0.0, +0.3) | 3.00 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥5000N | 300 mm | ≥40kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD3227 | HDPE (High Density Polyethylene) | 32.0mm / 27.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 32.0 (-0.0, +0.3) | 2.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥4000N | 300 mm | ≥30kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD3228 | HDPE (High Density Polyethylene) | 32.0mm / 28.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 32.0 (-0.0, +0.3) | 2.10 (-0.2, +0.20) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥3000N | 400 mm | ≥50kN/m2 | ≤3,0% | 1.2MPa |
| DW-SD3326 | HDPE (High Density Polyethylene) | 33.0mm / 26.0mm | Penuh warna | Gamelan karo Silicon utawa Inner Iga karo Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 33.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥5000N | 300 mm | ≥40kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD3832 | HDPE (High Density Polyethylene) | 38.0mm / 32.0mm | Penuh warna | Gamelan | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 38.0 (-0.0, +0.3) | 3.00 (-0.2, +0.20) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥400% | ≥6000N | 440 mm | ≥30kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD4032-RIBS | HDPE (High Density Polyethylene) | 40.0mm / 32.0mm | Penuh warna | Iga Inner karo Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 40.0 (-0.0, +0.4) | 4.00 (-0.00, +0.35) | ≤5 | ≥59 | ≤0.08 | ≥21MPa | ≥500% | ≥8500N | 480 mm | ≥50kN/m2 | ≤3,0% | 2,5 MPa |
| DW-SD4032 | HDPE (High Density Polyethylene) | 40.0mm / 32.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 40.0 (-0.0, +0.4) | 4.00 (-0.00, +0.35) | ≤5 | ≥59 | ≤0.08 | ≥21MPa | ≥500% | ≥8500N | 480 mm | ≥50kN/m2 | ≤3,0% | 2,5 MPa |
| DW-SD4033 | HDPE (High Density Polyethylene) | 40.0mm / 33.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 40.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 (Dinamis) ≤0,25 (statis) | ≥21MPa | ≥500% | ≥8000N | 400 mm | ≥50kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD4034 | HDPE (High Density Polyethylene) | 40.0mm / 34.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 40.0 (-0.0, +0.3) | 3.50 (-0.2, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥6000N | 400 mm | ≥30kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD4035 | HDPE (High Density Polyethylene) | 40.0mm / 35.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 40.0 (-0.0, +0.3) | 3.50 (-0.1, +0.20) | ≤10 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥3000N | 500 mm | ≥20kN/m2 | ≤3,0% | 1.2MPa |
| DW-SD4233 | HDPE (High Density Polyethylene) | 42.0mm / 33.0mm | Penuh warna | Iga Inner karo Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 42.0 (-0.0, +0.4) | 3.85 (-0.00, +0.30) | ≤7 | ≥59 | ≤0.1 | ≥21MPa | ≥500% | ≥12000N | 800 mm | ≥30kN/m2 | ≤3,0% | 2,5 MPa |
| DW-SD4236-RIBS | HDPE (High Density Polyethylene) | 42.0mm / 36.0mm | Penuh warna | Iga Inner karo Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 42.0 (-0.0, +0.4) | 3.00 (-0.00, +0.30) | ≤7 | ≥59 | ≤0.1 | ≥21MPa | ≥500% | ≥8000N | 500 mm | ≥30kN/m2 | ≤3,0% | 2,5 MPa |
| DW-SD4638 | HDPE (High Density Polyethylene) | 46.0mm / 38.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 46.0 (-0.0, +0.3) | 4.00 (-0.20, +0.20) | ≤5 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥10000N | 1000 mm | ≥30kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD5041 | HDPE (High Density Polyethylene) | 50.0mm / 41.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 50.0 (-0.0, +0.4) | 4.50 (-0.30, +0.30) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥380% | ≥12000N | 1000 mm | ≥30kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD5042-RIBS | HDPE (High Density Polyethylene) | 50.0mm / 42.0mm | Ireng utawa Customized | Iga Inner karo Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 50.0 (-0.0, +0.4) | 4.00 (-0.20, +0.20) | ≤7 | ≥59 | ≤0.1 | ≥21MPa | ≥400% | ≥12000N | 600 mm | ≥30kN/m2 | ≤3,0% | 2,5 MPa |
| DW-SD5042 | HDPE (High Density Polyethylene) | 50.0mm / 42.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 50.0 (-0.0, +0.4) | 4.00 (-0.30, +0.30) | ≤7 | ≥59 | ≤0.12 | ≥21MPa | ≥400% | ≥12000N | 1000 mm | ≥30kN/m2 | ≤3,0% | 1.6MPa |
| DW-SD5043 | HDPE (High Density Polyethylene) | 50.0mm / 43.0mm | Penuh warna | Gamelan Kanthi Silicon | 0,1 ~ 0,3 g / 10 menit (190 C , 2.16KG) | Min.0,940 g/cm3 | Min.21MPa | Min 350% | Min.350 jam | 50.0 (-0.0, +0.4) | 3.50 (-0,1, +0,25) | ≤7 | ≥59 | ||||||||
gambar
Kemasan
Testing produk
Sertifikasi
Perusahaan Kita
Tulis pesen sampeyan ing kene lan kirimake menyang kita
